This cable is highly recomended for any camera being triggered using infrared light. It allows you to put the Pclix behind or below your camera and not directly in front as would be the case if the cable is not used. One end of cable plugs into the Pclix LT100 the other sits overtop of the infrared receive on your camera. The length of this cable is 39" (1m). Need a longer one? Custom lengths are possible.

A few of our clients require the ability to trigger two cameras at the same time using one Pclix LT100. This cable will allow you to do just that. Like the cable above it plugs into the Plcix LT100 and each leg of the cable is 39" (1m) in length. If you require longer cables or more than two legs please contact us and we will custom build to your specs.

This cable can be used to connect the Pclix LT100 directly to any Canon camera in the Rebel series. The 450D, 400D, 300D, 350D, Digital Rebel, Digital Rebel XT, XTi, XSi, Kiss Digital, Kiss Digital-N are all compatable. The cable length is 5 feet (1.4m). Do you requried a longer length? Please contact us if you do.

This cable is used for Canon cameras which make use of the N-3 remote connection on the camera. The following camera models are compatible with this cable, 1D, 1Ds, 1D Mark II, 10D, 20D, 30D, 60D and D2000. The cable length is 30" (0.75m). Longer cables can be custom made. NOTE: This cable is NOT compatible with the Canon 5D camera model.

This cable is used for the 5D Canon camera which also shares the N-3 remote connector. While this cable is specifically for the 5D it is also compatible with all the cameras listed above using the C-320 Canon cable. The quality of the connector on this cable is superior to the C-320 hence the higher cost. The cable length is 30" (0.75m). Longer cables can be custom made.

This cable will allow you to connect the Pclix LT100 directly to either the Nikon D70s or D80 camera body. NOTE: This cable is not compatable with the new Nikon D90, the Nikon D70, D60, D50 or D40. This cable is 30" (0.75m) in length. If required custom lengths can be ordered.

This cable will allow you to connect the Pclix LT100 directly to any of the following cameras having the 10 pin remote connection. Nikon D1, D1X, D1H, D2, D2X, D2H, D200, F5, F100, F90, F90X, N90 or the D100 if it has the vertical grip installed. Also this cable supports the Kodak DCS 14-N and the Fuji Finepix S3 Pro. This cable is 30" (0.75m) in length. If required custom lengths can be ordered.

This cable uses three of the extra pins on the camera's USB connection and will allow you to connect the Pclix LT100 directly to any of the following Olympus camera, E400, E410, E510 & SP550. This cable is 30" (0.75m) in length. If required custom lengths can be ordered.
NOTE: The C-530 cable is NOT compatible with the E-500 model. For the E-500 you must use the C-100 infrared cable above.

This cable plugs into the camera's 3 pin remote connector on one end and the Pclix LT100 on the other. It is fully compatible with tthe following Olympus camera models E-1, E-3, E-10, E-20, E-300. This cable is 30" (0.75m) in length. If required custom lengths can be ordered.
NOTE: The C-540 cable is NOT compatible with the E-500 model. For the E-500 you must use the C-100 infrared cable above.

This cable will allow you to connect the Pclix LT100 to any of the following cameras. Sony Alpha DLSR A100 or Minolta models Minolta Dynax 7D & 5D. This cable is 30" (0.75m) in length.

This cable can be used to connect the Pclix LT100 directly to any device which can be triggered by a contact switch closure. In this case the Pclix LT100 can trigger devices other than cameras which require timed interval triggers.